Schilling, Antje and Gabriel, Felix and Dietrich, Franz and Dröder, Klaus (2019). Design of an Automated System to Accelerate the Electrolyte Distribution in Lithium-Ion Batteries [9]. International Journal of Mechanical Engineering and Robotics Research, 162-166.

Schilling, Antje and Gümbel, Philip and Möller, Markus and Kalkan, Fatih and Dietrich, Franz and Dröder, Klaus (2019). X-ray based visualization of the electrolyte filling process of lithium ion batteries [10]. Journal of The Electrochemical Society, 163-167.

Bobka, Paul and Heyn, Jakob and Henningson, Jann-Ole and Römer, Martin and Engbers, Thomas and Dietrich, Franz and Dröder, Klaus (2018). DEVELOPMENT OF AN AUTOMATED ASSEMBLY PROCESS SUPPORTED WITH AN ARTIFICAL NEURAL NETWORK [11]. Journal of Machine Engineering; XXIX CIRP Sponsored Conference on Supervising and Diagnostics of Machining Systems in Karpacz, 28-41.

Bockwinkel, Kai and Thiede, Bastian and Dietrich, Franz and Thiede, Sebastian and Dröder, Klaus and Herrmann, Christoph (2018). Automated evaluation of battery materials for more efficient and effective battery development [12]. The 31st International Electric Vehicles Symposium and Exhibition & International Electric Vehicle Technology Conference 2018

Bockwinkel, Kai and Thiede, Bastian and Dietrich, Franz and Thiede, Sebastian and Dröder, Klaus and Herrmann, Christoph (2018). System for Automated Test Cell Assembly with Integrated Knowledge Discovery Support [13]. Kraftwerk Batterie, Münster.

Campocasso, Sébastian and Chalvin, Maxime and Reichler, Ann-Kathrin and Gerbers, Roman and Dröder, Klaus and Hugel, Vincent and Dietrich, Franz (2018). A framework for future CAM software dedicated to additive manufacturing by multi-axis deposition [14]. Procedia CIRP, 79-84.

Cerdas, Felipe and Gerbers, Roman and Andrew, Stefan and Schmitt, Jan and Dietrich, Franz and Thiede, Sebastian and Dröder, Klaus and Herrmann, Christoph (2018). Recycling of Lithium-Ion Batteries [15]. Springer International Publishing, 83-97.

Dröder, Klaus and Bobka, Paul and Germann, Tomas and Gabriel, Felix and Dietrich, Franz (2018). A Machine Learning-Enhanced Digital Twin Approach for Human-Robot-Collaboration [16]. 7th CIRP Conference on Assembly Technologies and Systems (CATS)

Fröhlich, Arian and Leithoff, Ruben and von Boeselager, Christina and Dröder, Klaus and Dietrich, Franz (2018). Investigation of particulate emissions during handling of electrodes in lithium-ion battery assembly [17]. Procedia CIRP, 341-346.

Fröhlich, Arian and Thon, Christoph and Dietrich, Franz and Schilde, Carsten (2018). Conceptual Design of a Soft Material Linear Switched Reluctance Motor for Soft Robotic Applications [18]. World Conference in Computational Mechanics.

Gabriel, Felix and Heyn, Jakob and Dietrich, Franz and Dröder, Klaus (2018). A Novel Framework for Joint Task and Manufacturing Optimization of Multi-Material Soft Robots [19]. 13th World Congress in Computational Mechanics (WCCM)

Gerbers, Roman and Wegener, Kathrin and Dietrich, Franz and Dröder, Klaus (2018). Recycling of Lithium-Ion Batteries [20]. Springer Verlag, Berlin, 99-126.

Heyn, Jakob and Gümbel, Philip and Bobka, Paul and Dietrich, Franz and Dröder, Klaus (2018). Application of artificial neural networks in force-controlled automated assembly of complex shaped deformable components [21]. Procedia CIRP, 1.

Kwade, Arno and Haselrieder, Wolfgang and Leithoff, Ruben and Modlinger, Armin and Dietrich, Franz and Dröder, Klaus (2018). Current status and challenges for automotive battery production technologies [22]. Nature Energy, 290-300.

Leithoff, Ruben and Fröhlich, Arian and Masuch, Steffen and Dietrich, Franz and Dröder, Klaus (2018). Examination of the correlation between deposition accuracy of electrodes and electrochemical properties of lithium-ion batteries [23]. Kraftwerk Batterie, Münster.

Schilling, Antje and Gabriel, Felix and Dietrich, Franz and Dröder, Klaus (2018). Design of an Automated System to Accelerate the Electrolyte Distribution in Lithium-Ion Batteries [24]. 2nd International Conference on Advanced Manufacturing and Materials (ICAMM 2018)

Schilling, Antje and Schröder, Christian and Dietrich, Franz and Dröder, Klaus (2018). Deduction of an evaluation process for the optical characterization of the macroscopic electrolyte distribution in lithium-ion batteries [25]. Conference of Advanced Automotive Batteries (AABC)

Schmitt, Ricarda and Decressin, Robert and Dietrich, Franz and Dröder, Klaus (2018). Detection of wear parameters using already included sensors in the machines environment to reach higher machine precession [26]. Journal of Machine Engineering; XXIX CIRP Sponsored Conference on Supervising and Diagnostics of Machining Systems in Karpacz, 65-71.

Schnurr, Raphael and Beuscher, Jan and Dietrich, Franz and Dröder, Klaus (2018). Pre-assembly and handling of limp endless fibre-reinforced thermoplastic-metal preforms [27]. 18th European Conference on Composite Materials

Turetskyy, Artem and Leithoff, Ruben and Xu, Wenhao and Thiede, Sebastian and Dietrich, Franz and Dröder, Klaus and Herrmann, Christoph (2018). Assessment of battery cell assembly through non-invasive cell characterization using X-ray computer tomography [28]. The 31st International Electric Vehicles Symposium and Exhibition & International Electric Vehicle Technology Conference 2018

Wonnenberg, Birk and Dietrich, Franz and Dröder, Klaus (2018). In-situ measurement technologies for flow behaviour and contact status of fibre-reinforced thermoplastics during forming with a six degree of freedom press [29]. 5th International Conference on New Forming Technology (ICNFT 2018). EDP Sciences, 07004.

Bockwinkel, Kai and Thiede, Bastian and Thiede, Sebastian and Dietrich, Franz and Dröder, Klaus and Herrmann, Christoph (2017). Conceptual Design of a System for Data-Supported Automated Evaluation of Electrochemical Test Cells [30]. Kraftwerk Batterie, Aachen.

Dietrich, Franz and Dröder, Klaus and Bobka, Paul (2017). Towards self-assessment of human-robot-collaboration safety in an assembly environment: a digital twin approach [31]. (Technical Presentation at CiRP GA STC-A).

Dietrich, Franz and Dröder, Klaus and Tornow, Alexander (2017). A novel method for assembly planning of modular battery systems based upon product packaging [32]. (Technical Presentation CiRP General Winter Meeting STC-A).

Dröder, Klaus and Dietrich, Franz and Tornow, Alexander and Löchte, Christian and Wonnenberg, Birk and Gerbers, Roman and Bobka, Paul (2017). Handbuch Industrie 4.0 [33]. Hanserverlag, 429-450.

Dröder, Klaus and Gerbers, Roman and Reichler, Ann-Kathrin and Bobka, Paul and Müller, Anke and Dietrich, Franz (2017). Incremental Manufacturing: Design Aspects of flexible hybrid Manufacturing Cells for multi-scale Production [34]. 7. WGP-Jahreskongress. Apprimus Verlag, Aachen, 637-647.

Leithoff, Ruben and Graubohm, Robert and Schilling, Antje and Tornow, Alexander and Dietrich, Franz and Dröder, Klaus (2017). Statistical Investigation of Stacking Errors in Battery Assembly Using Monte Carlo Simulation [35]. Kraftwerk Batterie, Aachen.

Schilling, Antje and Fröhlich, Arian and Dietrich, Franz and Dröder, Klaus (2017). Round Table Education as an Innovative Approach to Interdisciplinary Higher Education in Engineering [36]. Infonomics Society.

Schilling, Antje and Kammann, Simon and Berger, Hagen and Tornow, Alexander and Dietrich, Franz and Dröder, Klaus (2017). In-situ Investigation of the Electrolyte Filling Process by conventional X-Ray Radiography [37]. Kraftwerk Batterie, Aachen.

Schmitt, Ricarda and Riedel, Johannes and Dröder, Klaus and Dietrich, Franz (2017). A methodology for a structured process analysis of complex production processes with a small database [38]. WGP Jahreskongress Aachen, 213-219.

Schnurr, Raphael and Beuscher, Jan and Dietrich, Franz and Müller, Anke and Dröder, Klaus (2017). Process design concept for automated pre-assembling of multi-material preforms [39]. 21st International Conference on Composite Materials, 1.

Beuscher, Jan and Brand, Michael and Schnurr, Raphael and Müller, Anke and Kühn, Markus and Dietrich, Franz and Dröder, Klaus (2016). Improving the processing properties of hybrid components using interlocking effects on supporting structures [40]. ECCM17 - 17th European Conference on Composite Materials

Beuscher, Jan and Schnurr, Raphael and Müller, Anke and Kühn, Markus and Dietrich, Franz and Dröder, Klaus (2016). Introduction of different Approaches for IN-LINE Heating Thermoplastic Preforms for manufacturing hybrid components [41]. 7th International Symposium on Composites Manufacturing for High Performance Applications

Bobka, Paul and Heyn, Jakob and Gerbers, Roman and Dietrich, Franz and Dröder, Klaus (2016). Simulation Platform to Investigate Safe Operation of Human-Robot Collaboration Systems [42]. 6th CIRP Conference on Assembly Technologies and Systems (CATS), 187–192.

Bockwinkel, Kai and Dietrich, Franz and Dröder, Klaus (2016). Design of an automated system for the evaluation of materials for battery research [43]. 6th CIRP Conference on Assembly Technologies and Systems (CATS)

Bockwinkel, Kai and Dietrich, Franz and Dröder, Klaus (2016). Conceptual Design of an Automated System for the Assembly of Electrochemical Test Cells [44]. Kraftwerk Batterie, Münster.

Dietrich, Franz and Raatz, Annika and Dröder, Klaus (2016). High productivity for Individual Concrete Structures through Additive Manufacturing and Assembly. Part II. Assembly concepts which benefit from additive manufacturing [45]. (Presentation CiRP General Assembly STC A).

Dröder, Klaus and Dietrich, Franz and Fricke, Andreas and Gerhard, Camilo and Schäfer, Matthias (2016). Automated Non-destructive Testing of Hybrid Structures [46]. World Conference on Non-Destructive Testing, 4.

Dröder, Klaus and Dietrich, Franz and Löchte, Christian and Hesselbach, Jürgen (2016). Model based Design of process-specific Handling Tools for Workpieces with many variants in Shape and Material [47]. CIRP Annals - Manufacturing Technology, 53-56.

Dröder, Klaus and Heyn, Jakob and Gerbers, Roman and Wonnenberg, Birk and Dietrich, Franz (2016). Partial Additive Manufacturing: Experiments and Prospects with Regard to Large Series Production [48]. 5th CIRP Global Web Conference - Research and Innovation for Future Production (CIRPe 2016)

Dröder, Klaus and Schnurr, Raphael and Beuscher, Jan and Lippky, Kristian and Müller, Anke and Kühn, Markus and Dietrich, Franz and Kreling, Stefan and Dilger, Klaus (2016). An Integrative Approach Towards Improved Processability and Product Properties in Automated Manufacturing of Hybrid Components [49]. 2. Internationale Konferenz Euro Hybrid - Materials and Structures

Gerbers, Roman and Mücke, Markus and Dietrich, Franz and Dröder, Klaus (2016). Simplifying Robot Tools by Taking Advantage of Sensor Integration in Human Collaboration Robots [50]. 6th CIRP Conference on Assembly Technologies and Systems (CATS), 287–292.

Heyn, Jakob and Schnurr, Raphael and Dietrich, Franz and Dröder, Klaus (2016). Self-Supporting End Effectors: Towards Low Powered Robots for High Power Tasks [51]. 6th Conference on Assembly Technologies ans Systems (CATS)

Jansen, Tobias and Schilling, Antje and Kreling, Stefan and Dietrich, Franz and Dröder, Klaus and Dilger, Klaus (2016). DaLion - Investigation of Remote laser beam cutting and z-folding of Battery foil for optimized process design in the LIB-production [52]. Batterieforum, Berlin.

Lippky, Kristian and Kreling, Stefan and Dilger, Klaus and Beuscher, Jan and Schnurr, Raphael and Kühn, Markus and Dietrich, Franz and Dröder, Klaus (2016). Integrierte Produktionstechnologien zur Herstellung hybrider Leichtbaustrukturen [53]. Lightweight Design, 59-63.

Neudecker, Stefan and Bruns, Christopher and Gerbers, Roman and Heyn, Jakob and Dietrich, Franz and Dröder, Klaus and Raatz, Annika and Kloft, Harald (2016). A New Robotic Spray Technology for Generative Manufacturing of Complex Concrete Structures Without Formwork [54]. 14th Conference on Computer Aided Tolerancing (CAT), 333–338.

Nowak, Christine and Froböse, Linus and Kwade, Arno and Bockwinkel, Kai and Dietrich, Franz and Dröder, Klaus (2016). Prozesstechnik zur Herstellung von Silizium-Kohlenstoff- Verbundstrukturen für Lithium Ionen Batterien [55]. Batterieforum, Berlin.

Raatz, Annika and Dietrich, Franz and Dröder, Klaus (2016). High productivity for Individual Concrete Structures through Additive Manufacturing and Assembly. Part I: A robotic spray technology for complex concrete workpieces [56]. (Presentation CiRP General Assembly STC A).

Schilling, Antje and Dietrich, Franz and Dröder, Klaus (2016). Data mining for package assembly of lithium ion battery cells [57]. Kraftwerk Batterie, Münster.

Schilling, Antje and Schmitt, Jan and Dietrich, Franz and Dröder, Klaus (2016). Analyzing Bending Stresses on Lithium-Ion Battery Cathodes induced by the Assembly Process [58]. Energy Technology, 1502-1508.